Installation requirements of
Eccentric Butterfly Valve With Electric Actuator
1. The nameplate of the Eccentric Butterfly Valve With Electric Actuator should comply with the current general valve standard. For valves with a working pressure greater than 1.0 MPa and a cut-off function on the main pipe, the strength and tightness performance test should be carried out before installation, and the valve can be used only after it is qualified.
2. When the
Eccentric Butterfly Valve With Electric Actuator is installed, the disc should be stopped in the closed position. The opening position should be determined according to the rotation angle of the butterfly plate. For butterfly valves with bypass valves, the bypass valve should be opened before opening. The installation should be carried out according to the installation instructions of the manufacturer, and the heavy butterfly valve should be installed with a firm foundation.
3. The installation position, height, and inlet and outlet direction of the
Eccentric Butterfly Valve With Electric Actuator must meet the design requirements. Note that the direction of the medium flow should be consistent with the arrow direction marked on the valve body, and the connection should be firm and tight. The electric butterfly valve must be visually inspected before installation.
4. The
Eccentric Butterfly Valve With Electric Actuator is small and light, easy to disassemble and repair, and can be installed in any position. The structure is simple and compact, and the 90-degree rotation can be opened quickly. The operating torque is small, labor-saving and lightweight. The flow characteristics tend to be straight, and the regulation performance is good.
